Stein SMB1000 Rigging Bollard

Description
Features

Stein SMB1000 Rigging Bollard Description

The STEIN SMB1000 single bollard lowering device has a WLL of 1000kg and designed to work effectively with ropes of up to 14mm (Recommended Rope - STEIN Omega 12mm or 14mm). The line is guided down to the bollard and managed by fairleads both front and rear.

To help prevent damage to the tree the device is fitted with 2 replaceable heavy duty Tree Protection Rubbers made from a hardwearing blend of SBR/NR rubber.

The device weighs in at just 4.4kg so can easily be mounted by one person utilising the top suspension point with the recommended STEIN Mounting Strap (SS-RCP6004).

For added security it is recommended the device is backed up by securing a sling to the base anchor point terminated in a self-tightening hitch such as a cow-hitch or timber-hitch. (Recommended Sling - STEIN 20mm Multi-Sling SS-3372008005).

Supplied with a specially designed ratchet strap fitted with Carbon Steel hooks with Keeper Pins to prevent the mounting hooks detaching from the device when not under tension. The webbing is made from a high tenacity 50mm wide polyester yarn and is UV resistant with a 6000kg breaking strength.

This strapping system allows the device to be fitted to tree with a diameter of up to 145cm.

The ratchet meets the requirements of the European Load Restraint Legislation Standard EN12195-2:2001 which requires the buckle to have a lashing capacity (LC) of 1000daN. This capacity is stamped on the ratchet together with a label for full traceability. The breaking strength (BS) of 2000Kg is also shown to indicate the maximum load that can be applied to the
buckle before failure.

Stein SMB1000 Rigging Bollard Features

Working Load Limit - 1000kg (WLL) refer to manual
Dimensions - 210mm (w) x 310mm (h)
Bollard Dimension - 73mm diameter x 140mm (l)
Materials - Back Plate 5mm Steel
Fairleads - 15mm Solid Bar
Body Finish - Powder coated
Bollard Finish - Lacquered with Rust Prevention
Rubbers - 148mm (l) x 50mm (w) x 50mm (h)
Rubber Material - SBR/NR rubber
Rubber Hardness - 70 medium/hard (Shore A Scale)
Strapping System - Ratchet Handle with tail
Webbing length - 4.65m (5.0m combined with Ratchet Handle)
Weight - 4.4kg (excluding Ratchet Strap), 5.8kg (Including Ratchet Strap)

Stein SMB1000 Rigging Bollard Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you.

Full Name:*

Email Address:*

Best Contact Number:*

Preferred method of contact:*

Your location:*

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

Enter not this field:

*Indicates a field you must enter.

When you have completed the form, please click the Send Details button ONCE to send